|
934121
 |
10 AMP.
Momentary to single shot Electronic Converter
Used
to send one one pulse only in the event of a contact closure
When the coil is energized the main contacts will close for 3 seconds
and open again until a new contact closure occurs.
Use full for the activation or pulse transmission in wireless remote controls.
The relay provides N.O. and N.C. contacts, and can
therefore be used with a wide variety of control
applications
Operation: Upon momentary or maintained
power application to the coil the output contact is energized for the
interval time. At the end of the delay the output de-energizes.
Reset occurs when the time delay is complete.
Specifications and
Features
- Replaces the normal ON
to
one pulse circuit.
- Momentary or continuous closure sends one pulse
of 3 seconds
- Operating power -
12 to 240 VAC or VDC
- Current drain - less than
0.01mA (pulse),
30 mA
3 seconds adjustable-
Relays switching capability – 1
0A. 125 VAC SPDT.
- DIN mount
LED indication time status and
power supply A1 & A2
Start Switch Closure Time: 20 milliseconds
minimum
Power Consumption:
0.7 to 3VA. AC, 0.5
to 1.7 W. DC
|
|
|
|
|
