Latch toggle relay

Momentary-to-Toggle (Bi-Stable) Switching Converter

The LATCH module is an auxiliary device designed to allow easy and reliable arming/disarming momentary, two wire start stop circuit, or with hand-held wireless remote controls. It may be looked upon as an easy-to-use, cost-effective "momentary-to-toggle (bi-stable)" switching converter.
Momentary closure of the terminals 2 and 5 will latch the relay.
A subsequent momentary closure will unlatch the relay.
Reset the Toggle relay by removing power from terminal 2 or 10
Note: The LATCH module is also suitable for similar performance in remote control operations.
The relay provides N.O. and N.C. contacts, and can therefore be used with a wide variety of control applications.

Specifications and Features

The LATCH relay provides N.O. and N.C. outputs.
Operating power - 12 ,24 , 110, 220 VAC/DC
Current drain - less than 1mA (unlatched), 60 mA (latched).
Relays switching – 10A / 125VAC.
Auto reset by power removal
Octal and DIN mount 11 pin Octal base included

DISCLAIMER: The applications shown here are referential help examples only, and are not intended for actual constructions plans
Contact a licensed professional for your project. Electrodepot assumes no responsibility of the use of this drawings