934135   

10 AMP. Momentary-to-Toggle (Bi-Stable) Switching Converter

The LATCH module is an auxiliary device designed to allow easy and reliable arming/disarming momentary, two wire start stop circuit, or with hand-held wireless remote controls. It may be looked upon as an easy-to-use, cost-effective "momentary-to-toggle (bi-stable)" switching converter.
Momentary closure of the terminals 2 and 5 will latch the relay.
A subsequent momentary closure of the  contacts will unlatch the relay.
Reset the Toggle relay by removing power from terminal 2 or 10
Note: The LATCH module is also suitable for similar performance in remote control operations.
The relay provides N.O. and N.C. contacts, and can therefore be used with a wide variety of control applications

Specifications and  Features      Applications

Output LATCH relay provides N.O. and N.C.   contact Operating power - 12 , 24 VAC/DC  and 120, 220 VAC Relay switching capability: 10 Amp. 220 V,  1.0 HP- 277 V,  0.5 HP - 120V 8 Amp. Ballast 8 Amp. Tungsten Auto reset by power removal 17.5 mm DIN-rail housing Environmental Storage Temperature: -23°C to 70°C,  Operating Temperature: -20°C to 60°C   LED indication time status and power supply A1 & A2 Start Switch Closure Time: 20 milliseconds minimum Power Consumption:  0.7 to 3VA. AC,  0.5 to 1.7 W. DC

Device is not to be used in life safety