Automation timers variable frequency drive contactors programmable controller
    
 
Site Last Updated
4 Channel Remote Control Digital  System RECEIVER
2 Miles of Line-of-Sight range Up to 10 Miles with Long Range Antenna
Over 64,000 Codes, Weather-Resistant Case, Power On and RF Activity Indicators

Wiring Diagram

937004  $379.99

Antenna not supplied
Select Antenna

 Required   Whip 8" Antenna   or  Long Range Antenna   

 		Required   Whip 8" Antenna   or  Long Range Antenna   SPECIFICATIONS
Output  N/0 and N/C relay 1 Amp @ 32 VDC isolated  contacts
Operating Voltage: 12 to 15.o VDC
Operating Temperature: -4° to +140° F (-20° to +60° C)
Receiver Type:  Digital Superheterodyne
Sensitivity:  -118 dB (minimum)
 Selectivity 6 KHz
Carrier Frequency 27,255 MHz
Number of Codes: 65,536
Code Setting Method  DIP switch programming
Data Input Alarm, restore, status, and low battery
Status Exception Time Frame: Four hours
Antenna Impedance 50 Ohms Quarter Wave Antenna NOT INCLUDED
Dimensions: 4.25 in L x 2.5 in W x 6.25 in H (108 x 64 x 159 mm)
Weight 1 lb. (0.454 Kg)
Current Drain 25 mA, typical standby 65 mA alarm @ 12 VDC
Outputs: Alarm  form "C" relay per channel  
Status exception one open collector output per receiver;   
Low Battery one open  collector output 50 mA @ 20 VDC to ground

Optional:
937112
Power adaptor,  		 Power relay Latch relay

.

    Warning: Radio control equipment is not to be used in life safety