|
|
16 Channels Remote Control
Digital System RECEIVER
2 Miles of
Line-of-Sight range Up to 10 Miles with
Long Range Antenna
Over 64,000 Codes,
Indoor use enclosure, Power On and RF
Activity Indicators
Wiring Diagram |
SPECIFICATIONS
Operating
Voltage: 12 to 15.o VDC
Operating
Temperature: -4° to +140° F (-20° to +60° C)
Receiver Type:
Digital Superheterodyne
Sensitivity: -118
dB (minimum)
Selectivity: 6
KHz
Carrier
Frequency: 27,255 MHz
Number of Codes:
65,536
Code Setting
Method: DIP switch programming
Data Input:
Alarm, restore, status, and low battery
Antenna
Impedance: 50 Ohms Quarter Wave
NOT INCLUDED
Dimensions: 7.9 in L x 1.25 in W x 6.5 in H (201 x 32 x 165
mm)
Weight: 1.5 lb.
(0.680 Kg)
Current Drain:
300 mA (max) @ 12 VDC, typical standby 65 mA alarm @ 12 VDC
Outputs: Alarm - form "C" relay per channel
Status
exception - one open collector output per receiver;
Low Battery - one open collector output per receiver (Audio and signal strength test points)
16 outputs
are all low current (100mA at 12VDC)
Optional Power relay
Latch relay
Whip 8" Antenna Long Range Antenna
Select Transmitter:
1 Ch Transmitter
4 Ch Transmitter
Optional
4Ch
Handheld transmitter
Power adapter 120VAC to 12 VDC
|
|
